Design. Develop. Source. Manufacture.

Product-Specific Inspection Planning

Agree the reference, checks, reporting and finding decisions before inspection. Keep inspection results separate from production or dispatch authorisation.

Planning guidance · No inspection booking, verified certificate, test result or release is issued by these pages.

Prepare an inspection-ready baseline

Put these details in the project requirements and confirm a separate inspection plan with the responsible parties.

Order & goods
Order/style ID, batch/lot references, ordered and available quantities, counting unit, size/colour allocation, location and packaging state.
Approved references
Final specification, measurement chart/method, BOM, physical sample ID, artwork, label and packing revisions. Identify open sample conditions and superseded files.
Checks & criteria
For each check, record feature, method, unit, actual agreed criterion/tolerance and applicable defect classification. No default numeric tolerance or AQL level is imposed here.
Coverage & selection
Agree full or sampled scope, the selection method, applicable sampling-plan reference and decision rules where used. Record unrepresented variants and access limitations.
Reviewer & logistics
Internal or independent reviewer, responsibility, stage, readiness conditions, access/equipment, report format, fees and timing subject to actual confirmation.
Finding & release owners
Name the contact for findings, correction/recheck responsibility and person authorised to decide the affected production or shipment scope.

Choose checkpoints that answer specific questions

These are planning options, not a promise that every inspection is included.

  1. Incoming components

    Check identity, allocation and agreed visible/component criteria before affected work. Record substitutions and separately required evidence.

  2. Early construction

    Review selected assemblies, workmanship and measurements against the named baseline while changes can still be discussed. Record actual goods and coverage.

  3. In-production review

    Document the actual stage and selected goods, observations and follow-up. An in-line review does not represent all later units.

  4. Pre-dispatch review

    Confirm readiness, assortment, labels, packaging and agreed checks on the identified goods. Record unavailable or uninspected units and unresolved findings.

  5. Recheck after correction

    Link to the original finding, corrected quantities and recheck method. Record what was verified and what remains outside the recheck scope.

Make the report reviewable, not just a pass badge

An inspection report needs identifiable goods, references and limitations.

Identity & scope
Report ID/date, reviewer, order/batch/style, location/stage, baseline revisions, quantities presented and inspected, selected variants and exclusions.
Observations & measurements
Check ID, location or point of measure, units/method, observed result and agreed criterion. Keep measured values distinct from comments or expectations.
Findings & attachments
Finding ID, defect/category under the agreed plan, affected item/quantity, clearly linked photographs and correction request. A photo alone does not establish tested performance.
Outcome & limits
State the outcome under the agreed plan, access/coverage limitations, unresolved items and evidence still required. Do not infer market compliance or blanket batch quality.
Follow-up & decision
Responsible person, correction proposal, recheck record, decision authority, date, affected quantity and conditions. Record dispatch authorisation separately.

Handle a finding as a traceable decision

Suggested workflow to agree for the project; no website approval or live issue history is created.

  1. Record and identify

    Assign a finding ID and attach it to the goods, baseline and observation. Avoid silently changing the original result.

  2. Define the affected scope

    Record implicated quantities/variants and decide whether affected work or dispatch must be held under the agreed plan while disposition is pending.

  3. Propose correction and impact

    Name the owner and proposed action, with consequences for materials, rework, cost, timing and evidence. A proposal is not authorisation.

  4. Obtain an authorised disposition

    Record the agreed correction/recheck, hold, rejection or documented exception for the specified scope. An exception must not be portrayed as conformity or replace required safety/compliance evidence.

  5. Verify and close, or carry forward

    Link the recheck and written decision to the original finding. Keep open items visible; record who can authorise any subsequent release.

Separate inspection from the next commitment

Use reviewed records, not an implied approval from a page or form.

Questions before inspection

Agree methods, acceptance criteria and authority for the actual goods.

Is one AQL level or tolerance used for every order?

No. This guide imposes no numeric default. Agree any sampling plan, defect classification, selection method and acceptance rule for the actual project.

Does a report automatically release shipment?

No. Record the responsible release authority, conditions and written decision separately; a report or local brief is not dispatch authorisation.

What if the goods are not ready or some variants cannot be checked?

Document actual readiness and unavailable goods, selection coverage and limitations. Confirm how the incomplete scope will be handled; do not label it fully inspected.

Does correction erase the original finding?

No. Retain the finding, correction, recheck and decision references so the resolution remains traceable. This website itself does not store those operating records.

Prepare the questions before an inspection

Use one draft for one planned checkpoint and identified goods. Keep proposed scope, existing references and unresolved questions distinct; the responsible parties must confirm the actual plan separately.

Local preparation only. Do not enter personal details, contact information or confidential designs. No inspection is booked, report issued, evidence verified or release authorised. Nothing is submitted or stored by the website. Download before leaving; leaving or reloading clears the fields.

Checkpoint and project references
Choose Still to discuss if the checkpoint is not yet known. Changing it invalidates the draft but keeps your notes for review.
Identify the style, order, batch or lot if known; a category is not a unique product reference. Leave missing details blank or mark them open.
Identify the technical baseline and superseded or unresolved versions. Leave missing details blank or mark them open.
Record actual reference IDs and versions, or mark them open. No sample approval is inferred. Leave missing details blank or mark them open.
Identify any existing report or finding and its source/date; this tool does not retrieve or verify documents. Leave missing details blank or mark them open.
State ordered and available quantities, counting units, size/colour allocation, location and packaging state. Keep unknown values open. Leave missing details blank or mark them open.
Separate proposed checks from actually agreed criteria. Record features, methods, units, criteria references and unanswered questions. No numeric tolerance or sampling default is supplied. Leave missing details blank or mark them open.
Describe proposed full or sampled scope, selection-method or plan references, missing variants and access limits. This draft does not establish representative coverage. Leave missing details blank or mark them open.
Identify requested claims, document/specimen references, applicable product/material versions, known limitations and questions for review. No evidence or claim is validated here. Leave missing details blank or mark them open.
Use role descriptions, not names or contact details. List who needs to review the plan, report findings, propose correction, recheck and separately authorise any next step. A proposal is not a decision. Leave missing details blank or mark them open.

Choose a checkpoint. Nothing is sent or approved.

Agree the scope before the check.

Identify the product, references and unresolved questions. Confirm the actual plan and responsibilities through the agreed operating channel.

Prepare a project brief