Design. Develop. Source. Manufacture.

Custom Scarves

Develop dimensions, fabric handle and artwork together. Make the finished edges and any fringe part of the specification, not an afterthought.

Custom development guide · These are requirements to discuss, not verified stock, manufacturing options or performance claims.

Choose the construction direction

State whether the direction is a rectangular scarf, square scarf or another shape. Describe the intended wearing arrangement, season and collection; shape and material appearance alone do not establish warmth or fibre composition.

Material & surface
Describe woven or knitted construction, preferred composition, weight, texture and drape. Confirm the actual material direction before choosing a finishing method; a reference image is not evidence of fibre content.
Artwork & repeat
Provide authorised artwork, colour references and a front/back direction. Distinguish an engineered placement from a repeating pattern, and identify which edge or centre alignment matters.
Edges & fringe
Define hem, binding, knitted edge or fringe where required. State whether dimensions include the fringe and specify label position, attachment and presentation.

Make the specification your own

Bring the decisions you have already made. Each option remains subject to feasibility and written scope confirmation.

Shape & proportion
Finished shape, length, width and how the piece is intended to be worn.
Surface design
Colour, artwork scale, repeat direction, border and face/reverse expectations.
Finishing
Edge method, corner treatment, fringe direction and label location.
Presentation
Folding, hangtag, care information and packing requirements.

Material guides explain what to review; they are not verified material stock records.

Prepare the measurements

Choose reference dimensions, units and a measuring method. Keep wearer or use references separate from finished-product dimensions and artwork placement.

Scarf measurement referenceIllustrative outline with four measurement references, A to D. Read the adjacent descriptions for the method. Not an actual product, approved pattern or numeric size chart.ABCD
Measurement illustration only. Not an actual product, approved pattern or numeric size chart. The fringe is optional. The rectangle and border do not specify your final shape or artwork.
A · Finished body length
Measure between the agreed finished body edges; exclude fringe unless explicitly specified otherwise.
B · Finished width
State the flat measuring method and the location if width varies along the piece.
C · Fringe length
If required, measure from the body edge to the agreed fringe endpoint. Record differences between ends separately.
D · Artwork offset
Locate an artwork or border reference from a named finished edge. This is a placement reference, not another garment dimension.

Record the base dimensions, flat measuring condition and tolerances. Review drape and the intended wrap or fold on the sample. The illustrated rectangle does not prescribe the shape or size of your project.

Review a versioned sample

Tie every comment to a sample ID or revision, a feature or measuring point, and the requested change.

  • Compare finished body dimensions and any fringe with the same agreed method.
  • Review handle, drape and face/reverse appearance against the material reference.
  • Check artwork scale, repeat direction, border and critical matching points.
  • Review edges, corners, fringe consistency and label attachment.
  • Define any care-related dimensional or appearance review separately; no shrinkage or colourfastness result is assumed.

Agree who approves the sample and which changes need another review. Sample approval does not by itself verify bulk quality or performance.

Prepare a useful quote request

Construction, material, shape, artwork method, edge finishing and packing affect the scope. Identify whether a square or rectangular design is required and which dimensions include fringe.

Quantity & mix
List quantities by style, colour and size. Confirm whether the minimum applies per style, per colour or to the order; a blanket 300-piece MOQ is not assumed.
Development scope
Attach the tech pack revision or authorised references. Identify pattern, sourcing, sample and revision work that remains open.
Commercial inputs
State destination, target timing, packing needs and any target cost with currency and cost scope. Material availability, pricing and lead time are confirmed after review.
Required evidence
List any material, care, performance or destination requirements. State the evidence needed; do not infer approval from this guide.

The project page currently supports brief preparation and manual email follow-up. Preparing or downloading a brief is not an accepted quote or order.

Choose your starting route

Different starting points need different development inputs.

Questions about scarves

Answers for this product direction; commercial terms are agreed for the actual project.

Should the scarf length include the fringe?

State the convention explicitly. Record body length and fringe length separately if that is the agreed method; do not mix total length and body length between samples.

Can an artwork file define the finished appearance?

Not by itself. Record scale, placement or repeat, colour references, face/reverse expectations and the actual material, then review the decorated sample.

Can the same edge finish be used on every fabric?

Do not assume so. Review the material and proposed hem, binding, knitted edge or fringe together; the construction and feasibility must be confirmed.

Does the rectangle shown determine the final shape?

No. It illustrates measuring references only. Include the intended shape, finished dimensions and relevant edge points in your own drawing.

General order questions →

Prepare your project

A brief template for scarves

Use the construction, measurement and sample-review topics above as a starting point. Copy the template into your own document and replace the placeholders with your references or open questions.

This is a preparation aid, not a finished tech pack, quotation or approval. It contains no confirmed dimensions or performance specifications. Nothing entered in your own document is saved or submitted by this page.

View brief template
APPARELNEXA — PRODUCT FAMILY BRIEF TEMPLATE
Preparation aid, not a completed tech pack, quotation, approval or verified product specification.
Product family: Scarves
Family reference: scarves (not a SKU or design revision)
Category: accessories
Document / design version: [supply or leave open]
Starting route: [OEM / ODM / Private Label / not sure — discuss feasibility]
Wearer, intended use and silhouette: [supply or leave open]
CONSTRUCTION DIRECTIONS — attach annotated drawings or references
Material & surface: [requested direction / reference / open question]
Artwork & repeat: [requested direction / reference / open question]
Edges & fringe: [requested direction / reference / open question]
MEASUREMENTS — define base size, units and measuring method; do not infer values from the illustration
Base size / size range / units / method / tolerances to discuss: [supply or leave open]
A · Finished body length: [requested value / method / open question]
B · Finished width: [requested value / method / open question]
C · Fringe length: [requested value / method / open question]
D · Artwork offset: [requested value / method / open question]
FABRIC & TRIMS — preferences are not confirmed specifications
Material / lining / trim reference and version: [supply or leave open]
QUANTITY PLAN — reconcile components and totals
Counting unit (pieces / pairs / sets): [define]
Style / colour / size breakdown and total: [supply or leave open]
Branding / artwork / labels / packaging references: [supply or leave open]
SAMPLE REVIEW — record the sample version and unresolved changes
Sample purpose / ID / revision: [supply or leave open]
Review question: Compare finished body dimensions and any fringe with the same agreed method.
Notes / outcome / open change: [to record]
Review question: Review handle, drape and face/reverse appearance against the material reference.
Notes / outcome / open change: [to record]
Review question: Check artwork scale, repeat direction, border and critical matching points.
Notes / outcome / open change: [to record]
Review question: Review edges, corners, fringe consistency and label attachment.
Notes / outcome / open change: [to record]
Review question: Define any care-related dimensional or appearance review separately; no shrinkage or colourfastness result is assumed.
Notes / outcome / open change: [to record]
RIGHTS & EVIDENCE QUESTIONS
Design / artwork rights or permission requiring review: [identify; do not attach confidential files here]
Requested claims / destination requirements / evidence scope: [identify for review; no approval implied]
DESTINATION, TIMING & SCOPE
Destination / desired timing / budget scope / excluded costs: [supply or leave open]
Outstanding decisions and next review questions: [list]
No values or approvals are supplied by this template. Use your own document to complete it and share only through an agreed channel.

The checklist carries only the recognised product family and category; copy your completed template into your Project Brief manually. The family reference is not a SKU or a selected design.

Define your scarf brief.

Share what is fixed and what still needs development.

Prepare this brief