Design. Develop. Source. Manufacture.

Custom Gloves

Define hand fit, finger construction and cuff as one brief. Record the intended use and any requested functionality separately from the appearance reference.

Custom development guide · These are requirements to discuss, not verified stock, manufacturing options or performance claims.

Choose the construction direction

Identify full-finger, mitten or fingerless direction, wearer and use. This page concerns apparel accessory development; protective, medical or other regulated performance must be separately scoped and supported before any claim is made.

Material & layers
Specify knitted or cut-and-sewn direction, stretch, handle and any lining. Record palm/back differences and skin-contact areas; insulation or weather performance is not implied by the material name.
Hand & finger construction
Define thumb position, finger shape, seams and any reinforcement. Include left/right relationship and wearer references; the same outline does not establish fit for every hand.
Cuff & requested features
Describe cuff length, opening and closure or elastic direction. Treat grip surfaces, touch interaction or other requested functionality as separate feasibility and sample-review items, not standard features.

Make the specification your own

Bring the decisions you have already made. Each option remains subject to feasibility and written scope confirmation.

Hand shape
Full-finger, mitten or fingerless outline and the relevant hand reference.
Layer build-up
Palm/back materials, lining and seam locations against the skin.
Cuff
Length, opening, adjustment and sleeve interface if relevant.
Pair presentation
Left/right identification, label locations, artwork and pair packing.

Material guides explain what to review; they are not verified material stock records.

Prepare the measurements

Choose reference dimensions, units and a measuring method. Keep wearer or use references separate from finished-product dimensions and artwork placement.

Full-finger glove measurement referenceIllustrative outline with four measurement references, A to D. Read the adjacent descriptions for the method. Not an actual product, approved pattern or numeric size chart.ABCD
Measurement illustration only. Not an actual product, approved pattern or numeric size chart. Full-finger outline only; other glove directions need their own measurements.
A · Palm width
Define the flat glove point across the palm. Keep this separate from hand circumference and do not automatically double one to infer fit.
B · Finished total length
Specify cuff edge to the named fingertip or endpoint, with the glove laid in the agreed condition.
C · Middle-finger length
For the illustrated full-finger direction, name the finger-base reference and fingertip endpoint. Specify each finger and thumb separately in the full chart.
D · Cuff opening
Record the relaxed flat opening and separately define any stretch or adjustment method.

Use an agreed hand reference and review both hands, finger reach, thumb movement and opening/closing the hand. Separate hand measurements from finished glove dimensions. The illustration shows a full-finger direction only, not a protective specification.

Review a versioned sample

Tie every comment to a sample ID or revision, a feature or measuring point, and the requested change.

  • Compare left/right fit, finger length, thumb position and palm allowance.
  • Check opening/closing the hand and intended handling tasks on the agreed reference.
  • Review seams, lining and labels for skin-contact comfort.
  • Check cuff entry, relaxed fit and any planned sleeve interface.
  • Where a feature is requested, define the actual use conditions and evidence; sample appearance alone does not establish protective or technical performance.

Agree who approves the sample and which changes need another review. Sample approval does not by itself verify bulk quality or performance.

Prepare a useful quote request

Finger/thumb development, palm/back materials, lining, cuff and optional surface details affect scope. Specify whether quantities refer to pairs or individual gloves, including replacement or mixed requirements.

Quantity & mix
List quantities by style, colour and size. Confirm whether the minimum applies per style, per colour or to the order; a blanket 300-piece MOQ is not assumed.
Development scope
Attach the tech pack revision or authorised references. Identify pattern, sourcing, sample and revision work that remains open.
Commercial inputs
State destination, target timing, packing needs and any target cost with currency and cost scope. Material availability, pricing and lead time are confirmed after review.
Required evidence
List any material, care, performance or destination requirements. State the evidence needed; do not infer approval from this guide.

The project page currently supports brief preparation and manual email follow-up. Preparing or downloading a brief is not an accepted quote or order.

Choose your starting route

Different starting points need different development inputs.

Questions about gloves

Answers for this product direction; commercial terms are agreed for the actual project.

Is the order quantity counted as gloves or pairs?

State the unit explicitly. List pairs, individual pieces or any replacement requirement separately so sampling, minimum quantities, quotation and packing use the same basis.

Can the same size chart cover mittens and full-finger gloves?

Do not assume so. Finger, thumb, palm and cuff construction differ; prepare the relevant dimensions and review fit for the chosen direction.

Are grip or touch-interaction features automatically included?

No. Identify the desired use, locations and material direction, then agree feasibility and review conditions. This page promises no functional outcome.

Does this page establish protective-glove compliance?

No. It is an apparel-development guide, not evidence of protective suitability, certification or tested performance. Separately identify the product, destination and required review before any claim.

General order questions →

Prepare your project

A brief template for gloves

Use the construction, measurement and sample-review topics above as a starting point. Copy the template into your own document and replace the placeholders with your references or open questions.

This is a preparation aid, not a finished tech pack, quotation or approval. It contains no confirmed dimensions or performance specifications. Nothing entered in your own document is saved or submitted by this page.

View brief template
APPARELNEXA — PRODUCT FAMILY BRIEF TEMPLATE
Preparation aid, not a completed tech pack, quotation, approval or verified product specification.
Product family: Gloves
Family reference: gloves (not a SKU or design revision)
Category: accessories
Document / design version: [supply or leave open]
Starting route: [OEM / ODM / Private Label / not sure — discuss feasibility]
Wearer, intended use and silhouette: [supply or leave open]
CONSTRUCTION DIRECTIONS — attach annotated drawings or references
Material & layers: [requested direction / reference / open question]
Hand & finger construction: [requested direction / reference / open question]
Cuff & requested features: [requested direction / reference / open question]
MEASUREMENTS — define base size, units and measuring method; do not infer values from the illustration
Base size / size range / units / method / tolerances to discuss: [supply or leave open]
A · Palm width: [requested value / method / open question]
B · Finished total length: [requested value / method / open question]
C · Middle-finger length: [requested value / method / open question]
D · Cuff opening: [requested value / method / open question]
FABRIC & TRIMS — preferences are not confirmed specifications
Material / lining / trim reference and version: [supply or leave open]
QUANTITY PLAN — reconcile components and totals
Counting unit (pieces / pairs / sets): [define]
Style / colour / size breakdown and total: [supply or leave open]
Branding / artwork / labels / packaging references: [supply or leave open]
SAMPLE REVIEW — record the sample version and unresolved changes
Sample purpose / ID / revision: [supply or leave open]
Review question: Compare left/right fit, finger length, thumb position and palm allowance.
Notes / outcome / open change: [to record]
Review question: Check opening/closing the hand and intended handling tasks on the agreed reference.
Notes / outcome / open change: [to record]
Review question: Review seams, lining and labels for skin-contact comfort.
Notes / outcome / open change: [to record]
Review question: Check cuff entry, relaxed fit and any planned sleeve interface.
Notes / outcome / open change: [to record]
Review question: Where a feature is requested, define the actual use conditions and evidence; sample appearance alone does not establish protective or technical performance.
Notes / outcome / open change: [to record]
RIGHTS & EVIDENCE QUESTIONS
Design / artwork rights or permission requiring review: [identify; do not attach confidential files here]
Requested claims / destination requirements / evidence scope: [identify for review; no approval implied]
DESTINATION, TIMING & SCOPE
Destination / desired timing / budget scope / excluded costs: [supply or leave open]
Outstanding decisions and next review questions: [list]
No values or approvals are supplied by this template. Use your own document to complete it and share only through an agreed channel.

The checklist carries only the recognised product family and category; copy your completed template into your Project Brief manually. The family reference is not a SKU or a selected design.

Define your glove brief.

Share what is fixed and what still needs development.

Prepare this brief